|
mod_ssl
|
 
|
|
 |
Compatibility
|
Glossary
|
|
|
|
``The wise man doesn't give the right answers,
he poses the right questions.''
|
|
Claude Levi-Strauss
|
his chapter is a collection of frequently asked questions (FAQ) and
corresponding answers following the popular USENET tradition. Most of these
questions occured on the Newsgroup
comp.infosystems.www.servers.unix or the mod_ssl Support
Mailing List
sw-mod-ssl@engelschall.com. They are collected at this place
to avoid answering the same questions over and over.
Please read this chapter at least once when installing mod_ssl or at least
search for your problem here before submitting a problem report to the
author.
|
|
|
%body
[L]
What are the differences between mod_ssl and Apache-SSL, from where it is derived?
This cannot be answered in short, because there are too much changes (see
the CHANGES and CHANGES.20 files in the mod_ssl
distribution for detailed information). Most of them are internal changes,
cleanups and re-organizations of the source code. But the user visible
changes are mainly the following:
- mod_ssl provides a complete documentation (this User Manual)
where all configuration directives, environment variables, and other
things are documented while Apache-SSL had no such documentation
although it existed for over three years when mod_ssl was split from
it (in April 1998). Additionally mod_ssl provides answers to often
occuring frequently asked questions (this list) in the
Apache/SSL/SSLeay area. For instance mod_ssl gives detailed hints
about how to setup a CA, how to create real a server Certificate, etc.
And the mod_ssl User Manual provides a compact introduction to the
complex SSL area itself. Because here are the typical hurdles located
every user stumbles over.
- mod_ssl comes with clean and documented source code with the
intent that only this way the user is able to re-view it for
backdoors, security holes, etc. This is considered important for
security-related software. It was always incomprehensible to the
author of mod_ssl how Apache-SSL could exist for over three years
while both the source code and the source patches were provided in an
undocumented and partly unreadable format. For the mod_ssl package
the source codes follows the Apache coding style, is logically
ordered to follow the API phases and even the patches to the
Apache source tree are annotated with descriptions to give the
user a chance to re-view and understand them.
- mod_ssl uses a generic Extended API to achieve
its functionality. This means instead of patching in
SSL/crypto-related code into the Apache kernel a clean and well
separated Extended API is patched in. This way the SSL and
cryptography code is only present inside the SSL module
itself (i.e. inside the
src/modules/ssl/ subtree only).
The benefit from this is a clean separation and API-conforming SSL
solution (which means for instance no direct SSL-references from the
kernel, no kludges and hacks to get called, etc).
- mod_ssl supports Dynamic Shared Object (DSO) building
as a direct consequence from using the Extended API. In short DSO
support means maximum flexibility under run-time, i.e. you don't have
to decide under compile-time whether to build or not to build SSL into
the Apache httpd executable. Instead you can just load mod_ssl through
mod_so's
LoadModule directive on demand. This
is especially interesting for two cases: Vendor package maintainers
receive the power they need for creating flexible packages and power
users receive the ability to run more than one Apache (non-SSL-aware
and SSL-aware) instance from a single Apache installation while still
saving RAM.
- mod_ssl is ported to the Win32 platform,
as it's the case for Apache and SSLeay. This way mod_ssl follows the
evolution of these packages and provides the always requested support
also for this nasty platform. As for the Unix/DSO case under Win32
mod_ssl is well-integrated into Apache through a stand-alone DLL which
can be loaded through mod_so's
LoadModule directive.
- mod_ssl can be really easily applied to the Apache source tree because
it provides a full-featured and automated configuration environment
for this task while Apache-SSL forced the user to fiddle with the
patch and cp tools theirself. Just
because security is not for amateurs hasn't to mean that user
friendliness is not important. So it's a must to assist the user
in applying the SSL-stuff to vanilla Apache sources. For this
mod_ssl integrates also very-well into the new Apache 1.3
Autoconf-style Interface (APACI). Additionally mod_ssl's
configuration mechanism supports the usage of RSAref, arbitrary
locations for SSLeay, etc.
- mod_ssl fixes a lot of bugs and inconsistencies which
existed in Apache-SSL. For Apache experts here are a few impressions:
Apache-SSL wrote directly to
stderr instead of the Apache
error logfile; it messed up it's error messages with the SSLeay error
messages; it directly patched the SERVER_BASEVERSION
define instead of using the Apache 1.3 conforming
ap_add_version_component function; it used the unsafe
sprintf function instead of the robust
ap_snprintf; it incorrectly spawned and killed the
gcache auxiliary program and it totally failed to pass the
``gcc -Wall -Wshadow -Wpointer-arith -Wcast-align
-Wmissing-prototypes -Wmissing-declarations -Wnested-externs
-Winline'' test (while Apache already passes it) because of
unclean code.
Additionally Apache-SSL didn't provide a way to easily apply it to
the Apache source tree (semi-manual editing and patching was
required); it didn't seamlessly integrate into the new Apache 1.3
Autoconf-style Interface (APACI) at configuration time; it didn't
automatically recognize the difference between an installed SSLeay and
an out-of-the-source-only SSLeay; it didn't provide integration into
the APACI installation process (make install); it used
numbers 0 to 2 instead of reasonable names for the argument of
SSLVerifyClient just because internally an
enum was used and for the provided
%{version}c construct of CustomLog it used the results
"2", "3" under SSLeay 0.8 while under SSLeay 0.9 the results were
"SSL2", "SSL3", etc. pp.
- mod_ssl adds new functionalities which were missing in
Apache-SSL. A few selected points which give you an impression
follow:
- mod_ssl provides a real dedicated SSL log file controlled by log
level and the additional features that messages logged at the
`error' level are automatically duplicated to the general Apache
error log file. And occuring system and SSLeay error messages are
automatically appended to mod_ssl messages. Additionally mod_ssl
annotates deep-level SSLeay messages with more high-level hints.
- mod_ssl provides a completely new and enhanced handling
of encrypted private key files. First the private keys are kept in
a permanent memory pool (as SSLeay already does internally), so
Apache now survives server restarts without falling down. Second
the pass phrase dialog is a lot more user friendly and advanced:
It uses a pass phrase reuse-algorithm to minimize the dialog, it
recognizes wrong pass phrases and allows retries (but with a
backoff time delay), etc. And additionally a minimal interface is
provided to plug-in an external program for providing the pass
phrase for special batch security situations.
- mod_ssl provides the
SSLCACertificateReqFile
directive which can be used to configure a different (from
SSLCACertificateFile) set of CA Certificates for the
SSLv3 feature used by the clients to load CA Certificates from the
server for speeding up server authentication.
- mod_ssl replaced the ``gcache'' stuff of Apache-SSL (used for
caching SSL sessions) with a more robust DBM-based solution,
because the controlling of an external program cannot be done very
reliable from within Apache. Additionally a "mutex" is now used to
synchronize the inter-process access to this cache.
- mod_ssl provides support for the SSLeay+RSAref couple, i.e.
mod_ssl supports the building with RSAref.
- mod_ssl provides a new SSLRequire directive which can be used
to implement more granular access control based on arbitrary
complex boolean expression.
- mod_ssl adds support for HTTPS to the Apache Proxy Module
(mod_proxy).
- mod_ssl is the first Open Source version of an SSL
extension to Apache which supports the Win32 platform.
- etc.pp.
When you're still really interested in more hard-core details walk through
the entries in the CHANGES and CHANGES.20 files
in the mod_ssl distribution.
Ok, does this mean I should avoid using Apache-SSL from now on?
No, it just means that you can use mod_ssl.
Beside the well-known flaws Apache-SSL works great. Ben Laurie did and
still does a great job in maintaining it. The big difference is just that
Ben Laurie's goals are different from Ralf S. Engelschall's goals. So, as
long as you don't get bothered by inconsistencies and other flaws you
don't have to upgrade. Instead you should decide yourself if you already
feel comfortable or not. If yes, stay with Apache-SSL - if not, move to
mod_ssl or (even better) one of the commercial SSL solutions for Apache.
Or in other words: No solution is better than another in general. Which
one you should use depends mainly on your personal requirements.
On which Apache-SSL version is mod_ssl actually based?
The mod_ssl package was initially created by porting the Apache-SSL 1.17
stuff from Apache 1.2.6 to Apache 1.3b6 in April 1998. Because of
conflicts with Ben Laurie's development cycle it then was re-assembled
from scratch for Apache 1.3.0 by merging the old mod_ssl with the newer
Apache-SSL 1.18. From this point mod_ssl lived its own life and changes
with Apache-SSL releases were merged after they were released. In other
words: mod_ssl is based on the latest Apache-SSL and always will contain
all useful changes which will occur with Apache-SSL in the future.
Why is mod_ssl's version starting with 2.0.0?
Because initially the mod_ssl project was intended as a contribution to
the Apache-SSL project from Ben Laurie. The idea was that mod_ssl formed
Apache-SSL 2.0.0. But after Ralf S. Engelschall and Ben Laurie couldn't
find a reasonable compromise in merging mod_ssl with Apache-SSL, the stuff
was released as a new package named ``mod_ssl''. But to still indicate
that it's some ``second generation'' stuff, the first mod_ssl version was
named 2.0.0.
How do I know which mod_ssl version is for which Apache version?
That's trivial: mod_ssl uses version strings of the syntax
<mod_ssl-version>-<apache-version>, for
instance 2.1.0-1.3.3. This directly indicates that it's
mod_ssl version 2.1.0 for Apache version 1.3.3. And this also means you
only can apply this mod_ssl version to exactly this Apache
version (unless you use the --force option to mod_ssl's
configure command ;-).
Is mod_ssl Year 2000 compliant?
Yes, mod_ssl is Year 2000 compliant.
Because first mod_ssl internally never stores years as two digits.
Instead it always uses the ANSI C & POSIX numerical data type
time_t type, which on mostly all Unix platforms at the moment
is a signed long (usually 32-bits) representing seconds since
epoch of January 1st, 1970, 00:00 UTC. This signed value overflows in
early January 2038 and not in the year 2000. Second, date and time
presentations (for instance the variable ``%{TIME_YEAR}'')
are done with full year value instead of abbreviating to two digits.
Additionally according to a Year 2000
statement from the Apache Group, the Apache webserver is Year 2000
compliant, too. But whether SSLeay or the underlaying Operating System
(either a Unix or Win32 platform) is Year 2000 compliant is a different
question which cannot be answered here.
What about mod_ssl and the Wassenaar Arrangement?
First, let us explain what Wassenaar and it's Arrangement on
Export Controls for Conventional Arms and Dual-Use Goods and
Technologies is: This is a international regime, established 1995, to
control trade in conventional arms and dual-use goods and technology. It
replaced the previous CoCom regime. 33 countries are signatories:
Argentina, Australia, Austria, Belgium, Bulgaria, Canada, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan,
Luxembourg, Netherlands, New Zealand, Norway, Poland, Portugal, Republic
of Korea, Romania, Russian Federation, Slovak Republic, Spain, Sweden,
Switzerland, Turkey, Ukraine, United Kingdom and United States. For more
details look at http://www.wassenaar.org/.
In short: The aim of the Wassenaar Arrangement is to prevent the build up
of military capabilities that threaten regional and international security
and stability. The Wassenaar Arrangement controls the export of
cryptography as a dual-use good, i.e., one that has both military and
civilian applications. However, the Wassenaar Arrangement also provides an
exemption from export controls for mass-market software and free software.
In the current Wassenaar ``List of Dual Use Goods and Technologies And
Munitions'', under ``GENERAL SOFTWARE NOTE'' (GSN) it says
``The Lists do not control "software" which is either: 1. [...] 2. "in
the public domain".'' And under ``DEFINITIONS OF TERMS USED IN
THESE LISTS'' one can find the definition: ``"In the public
domain": This means "technology" or "software" which has been made
available without restrictions upon its further dissemination. N.B.
Copyright restrictions do not remove "technology" or "software" from being
"in the public domain".''
So, both mod_ssl and SSLeay are ``in the public domain'' for the purposes
of the Wassenaar Agreement and its ``List of Dual Use Goods and
Technologies And Munitions List''.
Additionally the Wassenaar Agreement itself has no direct consequence for
exporting cryptography software. What is actually allowed or forbidden to
be exported from the countries has still to be defined in the local laws
of each country. And at least according to official press releases from
the German BMWi (see here) and the
Switzerland Bawi (see here) there
will be no forthcoming export restriction for free cryptography software
for their countries. Remember that mod_ssl is created in Germany and
distributed from Switzerland.
So, mod_ssl and SSLeay are not affected by the Wassenaar Agreement.
I want to run HTTP and HTTPS on the same machine. Is that possible?
Yes, there are two ways to do this: run two server instances, or run both
services from the same server instance. Unless there is a good reason to
run two (like using a different product for HTTP and HTTPS), it's usually
most simples to run a single instance where you enable SSL only for those
virtual hosts that need it. If you wish to run two server instances you
must make sure that they each only try to bind to their allowed ports
(normally port 80 for HTTP and 443 for HTTPS).
I know that HTTP is on port 80, but where is HTTPS?
You can run HTTPS on any port, but the standards specify port 443, which
is where any HTTPS compliant browser will look by default. You can force
your browser to look on a different port by specifying it in the URL like
this (for port 666): https://secure.server.dom:666/
How can I speak HTTPS manually for testing purposes?
While you usually just use
$ telnet localhost 80
GET / HTTP/1.0
for simple testing the HTTP protocol of Apache, it's not such easy for
HTTPS because of the SSL protocol between TCP and HTTP. But with the
help of SSLeay's s_client program you can do a similar
check even for HTTPS:
$ s_client -connect localhost:443 -state -debug
GET / HTTP/1.0
Before the actual HTTP response you receive detailed information about the
SSL handshake. For a more general command line client which directly
understands both the HTTP and HTTPS scheme, can perform GET and POST
methods, can use a proxy, supports byte ranges, etc. you should have a
look at nifty cURL
tool. With it you can directly check if your Apache is running fine on
Port 80 and 443 as following:
$ curl http://localhost/
$ curl https://localhost/
Why does my browser hang when I connect to my SSL-aware Apache server?
Because you used an URL of the form ``http://'' instead of
``https:''. Really! Also, if you see: ``SSL_Accept
failed error:140760EB:SSL routines: SSL23_GET_CLIENT_HELLO:unknown
protocol'' in your Apache error logfile, it's for the same reason.
This also happens the other way round, i.e. when you try to use
``https://'' on a server that doesn't support SSL (on this
port). Make sure you are connecting to a virtual server that supports
SSL, which is probably the IP associated with your hostname, not localhost
(127.0.0.1).
How can I use relative hyperlinks to switch between HTTP and HTTPS?
Usually you have to use fully-qualified hyperlinks because
you have to change the URL scheme. But with the help of some URL
manipulations through mod_rewrite you can achieve the same effect while
you still can use relative URLs:
RewriteEngine on
RewriteRule ^/(.*):SSL$ https://%{SERVER_NAME}/$1 [R,L]
RewriteRule ^/(.*):NOSSL$ http://%{SERVER_NAME}/$1 [R,L]
This rewrite ruleset lets you use hyperlinks of the form
<a href="document.html:SSL">
What are RSA Private Keys, CSRs and Certificates?
The RSA private key file is a digital file that you can use to decrypt
messages sent to you. It has a public component which you distribute (via
your Certificate file) which allows people to encrypt those messages to
you. A Certificate Signing Request (CSR) is a digital file which contains
your public key and your name. You send the CSR to a Certifying Authority
(CA) to be converted into a real Certificate. A Certificate contains your
RSA public key, your name, the name of the CA, and is digitally signed by
your CA. Browsers that know the CA can verify the signature on that
Certificate, thereby obtaining your RSA public key. That enables them to
send messages which only you can decrypt.
See the Introduction chapter for a general
description of the SSL protocol.
Seems like there is a difference on startup between the original Apache and an SSL-aware Apache?
Yes, in general, starting Apache with a built-in mod_ssl is just like
starting an unencumbered Apache, except for the fact that when you have a
pass phrase on your SSL private key file. Then a startup dialog pops up
asking you to enter the pass phrase.
To type in the pass phrase manually when starting the server can be
problematic, for instance when starting the server from the system boot
scripts. As an alternative to this situation you can follow the steps
below under ``How can I get rid of the pass-phrase dialog at Apache
startup time?''.
How can I create a dummy SSL server Certificate for testing purposes?
A Certificate does not have to be signed by a public CA. You can use your
private key to sign the Certificate which contains your public key. You
can install this Certificate into your server, and people using Netscape
Navigator (not MSIE) will be able to connect after clicking OK to a
warning dialogue. You can get MSIE to work, and your customers can
eliminate the dialogue, by installing that Certificate manually into their
browsers.
Just use the ``make certificate'' command at the top-level
directory of the Apache source tree right before installing Apache via
``make install''. This creates a self-signed SSL Certificate
which expires after 30 days and isn't encrypted (which means you don't
need to enter a pass-phrase at Apache startup time).
BUT REMEMBER: YOU REALLY HAVE TO CREATE A REAL CERTIFICATE FOR THE LONG
RUN! HOW THIS IS DONE IS DESCRIBED IN THE NEXT ANSWER.
Ok, I've got my server installed and not want to create a real SSL
server Certificate for it. How do I do it?
Here is a step-by-step description:
- Make sure SSLeay is really installed and in your
PATH.
But some commands even work ok when you just run the
``ssleay'' program from within the SSLeay source tree as
``./apps/ssleay''.
- Create a RSA private key for your Apache server
(will be Triple-DES encrypted and PEM formatted):
$ ssleay genrsa -des3 -out server.key 1024
Please backup this server.key file and remember the
pass-phrase you had to enter at a secure location.
You can see the details of this RSA private key via the command:
$ ssleay rsa -noout -text -in server.key
And you could create a decrypted PEM version (not recommended)
of this RSA private key via:
$ ssleay rsa -in server.key -out server.key.unsecure
- Create a Certificate Signing Request (CSR) for the server RSA private
key (output will be PEM formatted):
$ ssleay req -new -days 365 -key server.key -out server.csr
You can see the details of this CSR via the command
$ ssleay req -noout -text -in server.csr
- You now have to send this Certificate Signing Request (CSR) to
a Certifying Authority (CA) for signing. The result is then a real
Certificate which can be used for Apache. Here you have to options:
First you can let the CSR sign by a commercial CA like Verisign or
Thawte. Then you usually have to post the CSR into a web form, pay for
the signing and await the signed Certificate you then can store into a
server.crt file. For more information about commercial CAs have a look
at the following locations:
Second you can use your own CA and now have to sign the CSR yourself by
this CA. Read the next answer in this FAQ on how to sign a CSR with
your CA yourself.
You can see the details of the received Certificate via the command:
$ ssleay x509 -noout -text -in server.crt
- Now you have two files:
server.key and
server.crt. These now can be used as following inside your
Apache's httpd.conf file:
SSLCertificateFile /path/to/this/server.crt
SSLCertificateKeyFile /path/to/this/server.key
The server.csr file is no longer needed.
How can I create and use my own Certificate Authority (CA)?
The short answer is to use the CA.sh script provided by SSLeay.
The long and manual answer is this:
- Create a RSA private key for your CA
(will be Triple-DES encrypted and PEM formatted):
$ ssleay genrsa -des3 -out ca.key 1024
Please backup this ca.key file and remember the
pass-phrase you currently entered at a secure location.
You can see the details of this RSA private key via the command
$ ssleay rsa -noout -text -in ca.key
And you can create a decrypted PEM version (not recommended) of this
private key via:
$ ssleay rsa -in ca.key -out ca.key.unsecure
- Create a self-signed CA Certificate (X509 structure)
for the RSA key of the CA (output will be PEM formatted):
$ ssleay req -new -x509 -days 365 -key ca.key -out ca.crt
You can see the details of this Certificate via the command:
$ ssleay x509 -noout -text -in ca.crt
- Prepare a script for signing which is needed because
the ``
ssleay ca'' command has some strange requirements
and the default SSLeay config doesn't allow one easily to use
``ssleay ca'' directly. So a script named
sign.sh is distributed with the mod_ssl distribution
(subdir pkg.contrib/). Use this script for signing.
- Now you can use this CA to sign CSR's in order to create real
SSL Certificates for use inside an Apache webserver:
$ ./sign.sh server.csr
This signs the CSR and results in a server.crt file.
How can I change the pass-phrase on my private key file?
You simply have to read it with the old pass-phrase and write it again
by specifying the new pass-phrase. You can accomplish this with the following
commands:
$ ssleay rsa -des3 -in server.key -out server.key.new
$ mv server.key.new server.key
Here you're asked two times for a PEM pass-phrase. At the first
prompt enter the old pass-phrase and at the second prompt
enter the new pass-phrase.
How can I get rid of the pass-phrase dialog at Apache startup time?
The reason why this dialog pops up at startup and every re-start
is that the RSA private key inside your server.key file is stored in
encrypted format for security reasons. The pass-phrase is needed to be
able to read and parse this file. When you can be sure that your server is
secure enough you perform two steps:
- Remove the encryption from the RSA private key (while
preserving the original file):
$ cp server.key server.key.org
$ ssleay rsa -in server.key.org -out server.key
- Make sure the server.key file is now only readable by root:
$ chmod 400 server.key
Now server.key will contain an unencrypted copy of the key.
If you point your server at this file it will not prompt you for a
pass-phrase. HOWEVER, if anyone gets this key they will be able to
impersonate you on the net. PLEASE make sure that the permissions on that
file are really such that only root or the web server user can read it
(preferably get your web server to start as root but run as another
server, and have the key readable only by root).
How do I verify that a private key matches its Certificate?
The private key contains a series of numbers. Two of those numbers form
the "public key", the others are part of your "private key". The "public
key" bits are also embedded in your Certificate (we get them from your
CSR). To check that the public key in your cert matches the public
portion of your private key, you need to view the cert and the key and
compare the numbers. To view the Certificate and the key run the
commands:
$ ssleay x509 -noout -text -in server.crt
$ ssleay rsa -noout -text -in server.key
The `modulus' and the `public exponent' portions in the key and the
Certificate must match. But since the public exponent is usually 65537
and it's bothering comparing long modulus you can use the following
approach:
$ ssleay x509 -noout -modulus -in server.crt | ssleay md5
$ ssleay rsa -noout -modulus -in server.key | ssleay md5
And then compare these really shorter numbers. With overwhelming
probability they will differ if the keys are different. BTW, if I want to
check to which key or certificate a particular CSR belongs you can compute
$ ssleay req -noout -modulus -in server.csr | ssleay md5
Why does my 2048-bit private key not work?
The private key sizes for SSL must be either 512 or 1024 for compatibility
with certain web browsers. A keysize of 1024 bits is recommended because
keys larger than 1024 bits are incompatible with some versions of Netscape
Navigator and Microsoft Internet Explorer, and with other browsers that
use RSA's BSAFE cryptography toolkit.
Why is client authentication broken after upgrading from
SSLeay version 0.8 to 0.9?
The CA certificates under the path you configured with
SSLCACertificatePath are found by SSLeay through hash
symlinks. These hash values are generated by the `ssleay x509 -noout
-hash' command. But the algorithm used to calculate the hash for a
certificate has changed between SSLeay 0.8 and 0.9. So you have to remove
all old hash symlinks and re-create new ones after upgrading. Use the
Makefile mod_ssl placed into this directory.
Why has my webserver a higher load now that I run SSL there?
Because SSL uses strong cryptographic encryption and this needs a lot of
number crunching. And because when you request a webpage via HTTPS even
the images are transfered encrypted. So, when you have a lot of HTTPS
traffic the load increases.
What SSL Ciphers are supported by mod_ssl?
Usually just all SSL ciphers which are supported by the
version of SSLeay in use (can depend on the way you built
SSLeay). Typically this at least includes the following:
- RC4 with MD5
- RC4 with MD5 (export version restricted to 40-bit key)
- RC2 with MD5
- RC2 with MD5 (export version restricted to 40-bit key)
- IDEA with MD5
- DES with MD5
- Triple-DES with MD5
To determine the actual list of supported ciphers you can
run the following command:
$ ssleay ciphers -v
Why can't I use SSL with name-based/non-IP-based virtual hosts?
The reason is very technical. Actually it's some sort of a chicken and
egg problem: The SSL protocol layer stays below the HTTP protocol layer
and encapsulates HTTP. When an SSL connection (HTTPS) is established
Apache/mod_ssl has to negotiate the SSL protocol parameters with the
client. For this mod_ssl has to consult the configuration of the virtual
server (for instance it has to look for the cipher suite, the server
certificate, etc.). But in order to dispatch to the correct virtual server
Apache has to know the Host HTTP header field. For this the
HTTP request header has to be read. This cannot be done before the SSL
handshake is finished. But the information is already needed at the SSL
handshake phase. Bingo!
When I use Basic Authentication over HTTPS the lock icon in Netscape browsers
still show the unlocked state when the dialog pops up. Does this mean the
username/password is still transmitted unencrypted?
No, the username/password is already transmitted encrypted. The icon in
Netscape browsers is just not really synchronized with the SSL/TLS layer
(it toggles to the locked state when the first part of the actual webpage
data is transferred which is not quite correct) and this way confuses
people. The Basic Authentication facility is part of the HTTP layer and
this layer is above the SSL/TLS layer in HTTPS. And before any HTTP data
communication takes place in HTTPS the SSL/TLS layer has already done the
handshake phase and switched to encrypted communication. So, don't get
confused by this icon.
What information resources are available in case of mod_ssl problems?
The following information resources are available.
In case of problems you should search here first.
- Answers in the User Manual's F.A.Q. List (this)
http://www.modssl.org/docs/2.1/ssl_faq.html
First look inside the F.A.Q. (this text), perhaps your problem is such
popular that it was already answered a lot of times in the past.
- Postings from the sw-mod-ssl Support Mailing List
http://www.modssl.org/support/
Second search for your problem in one of the existing archives of the
sw-mod-ssl mailing list. Perhaps your problem popped up at least once for
another user, too.
- Problem Reports in the Bug Database
http://www.modssl.org/support/bugdb/
Third look inside the mod_ssl Bug Database. Perhaps
someone else already has reported the problem.
What support contacts are available in case of mod_ssl problems?
The following lists all support possibilities for mod_ssl, in order of
preference, i.e. start in this order and do not pick the support possibility
you just like most, please.
- Write a Problem Report into the Bug Database
http://www.modssl.org/support/bugdb/
This is the preferred way of submitting your problem report, because this
way it gets filed into the bug database (it cannot be lost) and
send to the sw-mod-ssl mailing list (others see the current problems and
learn from answers).
- Write a Problem Report to the sw-mod-ssl Support Mailing List
sw-mod-ssl @ engelschall.com
This is the second way of submitting your problem report. You have to
subscribe to the list first, but then you can easily discuss your problem
with both the author and the whole mod_ssl user community.
- Write a Problem Report to the author
rse @ engelschall.com
This is the last way of submitting your problem report. Please avoid this
in your own interest because the author is really a very busy men. Your
mail will always be filed to one of his various mail-folders and is
usually not processed as fast as a posting on sw-mod-ssl.
What information and details I've to provide to
the author when writing a bug report?
You have to at least always provide the following information:
- Apache, mod_ssl and SSLeay version information
The mod_ssl version you should really know. It's for instance the version
number in the distribution tarball. The Apache version can be determined
by running ``httpd -v''. The SSLeay version can be
determined by running ``ssleay version''. Alternatively when
you have Lynx installed you can run the command ``lynx -mime_header
http://localhost/ | grep Server'' to determine all information in a
single step.
- The details on how you built and installed Apache+mod_ssl+SSLeay
For this you can provide a logfile of your terminal session which shows
the configuration and install steps. Alternatively you can at least
provide the author with the APACI `configure'' command line
you used (assuming you used APACI, of course).
- In case of core dumps please include a Backtrace
In case your Apache+mod_ssl+SSLeay should really dumped core please attach
a stack-frame ``backtrace'' (see the next question on how to get it).
Without this information the reason for your core dump cannot be found.
So you have to provide the backtrace, please.
- A detailed description of your problem
Don't laugh, I'm totally serious. I already got a lot of problem reports
where the people not really said what's the actual problem is. So, in your
own interest (you want the problem be solved, don't you?) include as much
details as possible, please. But start with the essentials first, of
course.
Ok, I got a core dump but how do I get a backtrace to find out the reason for it?
Follow the following steps:
- Make sure you have debugging symbols available in at least
Apache and mod_ssl. On platforms where you use GCC/GDB you have to build
Apache+mod_ssl with ``
OPTIM="-g -ggdb3"'' to achieve this. On
other platforms at least ``OPTIM="-g"'' is needed.
- Startup the server and try to produce the core-dump. For this you perhaps
want to use a directive like ``
CoreDumpDirectory /tmp'' to
make sure that the core-dump file can be written. You then should get a
/tmp/core or /tmp/httpd.core file. When you
don't get this, try to run your server under an UID != 0 (root), because
some kernels don't write (for security reasons) core-dumps for
root-processes. Additionally you can run ``/path/to/httpd -X''
manually to force Apache not not fork.
- Analyze the core-dump. For this run ``
gdb /path/to/httpd
/tmp/httpd.core'' or a similar command has to run. In GDB you then
just have to enter the ``bt'' command and, voila, you get the
backtrace. For other debuggers consult your local debugger manual. Send
this backtrace to the author.
|